phnumb

Posts Tagged ‘fiberglass swimming pools’

Quick and Easy Fiberglass Swimming Pool Installation

Thursday, January 5th, 2012

Installing a fiberglass swimming pool is quick. The excavation and placement can be done in a couple of weeks. Most report it takes about 25 days for the whole process. Concrete swimming pools could take 2-3 months or more.

Since fiberglass pools are premade, it could cost more to install than a concrete pool.  You will need to excavate your backyard perfectly for the pool to fit. Remember if you place your pool near a water table or marshy wet area, your pool could float out of the ground if the land gets oversaturated or a flood occurs.

 

When Searching for a Fiberglass Pool Contractor

Wednesday, May 25th, 2011

1. Make sure all the contractors you are considering have business addresses and telephone numbers. Look for contractors who have been in the pool industry for at least  five years.

2.  Ask for references. Contact them to learn what their experiences were before, during and after work was completed. 

3.  Check for insurance and licensing. Ask to see certificates for liability and worker’s compensation.

4. Inquire about materials used, length of warranty and services included in the price. 

5. Always pay using cashier’s checks or money orders and get a receipt.  Verify what is included in the installation and what is not included. 

6.  Put in writing how long the installation will take from ground breaking to completion. 

Anthony & Sylvan fiberglass pools guarantee that you will be completely satisfied with your new pool. We are licensed and insured and are proud to supply with many of our satisfied company references.

Why Get A Custom Built Fiberglass Swimming Pool?

Thursday, April 28th, 2011

Back in the days, concrete or vinyl pools were the only thing on the market.  Currently, fiberglass swimming pools are taking the market by storm, proving to be far superior to concrete or vinyl pools. 

Consider the differences between walking on glass or walking on sandpaper, the sandpaper is rough and scratchy and the glass is cool and smooth.  Concrete pools can leave scrapes and cuts and even tear your bathing suit. Yet the fiberglass pool does not present these problems.  Also the smooth surface of a fiberglass pools makes it virtually impossible for algae and other micro organisms to flourish.

Fiberglass pools are more expensive than concrete pools at first, but the savings on maintenance costs are significant year in and year out. They use less chemicals needed to maintain water balance, less brushing and less repairs to the pool. Fiberglass pools are more expensive than concrete pools at first, but the savings on maintenance costs are significant year in and year out.

Get it right the first time with a fiberglass pool

Thursday, April 7th, 2011

 

So many consumers are installing a new pool for the second or third time.

Avoid making a costly mistake and it right the first time.  So why is a fiberglass pool a smart option? 

Installation is much quicker. Your pool comes pre-made and ready to install compared to that of a concrete pool which could take months to complete. 

Smooth finish and nearly maintenance free. The non porous surface cleans easily and is stain resistant.

Warranties are honored longer than concrete pools. Fiberglass pool’s surface lasts longer and won’t need to be resurfaced.

Why Get a Fiberglass Pool

Thursday, March 31st, 2011

There are a few great reasons why you should get a fiberglass pool. Below we have listed some of those reasons our customers choose to install a fiberglass pool over any other type of swimming pool for their backyard.

1. Innovative Designs – Fiberglass pool manufacturers produce pools with hundreds of shapes, sizes and colors for any budget.
2. Warranty – In ground fiberglass pools offer excellent warranties because they know that their products will never need to be resurfaced or replaced.
3. Low Maintenance – A fiberglass pool’s non porous surface does not allow algae to stick to the walls and floor which makes chemical balancing a breeze.
4. Fast Installation – Typical fiberglass pool installation takes between 2-4 weeks compared to vinyl and concrete pools.
5. Longevity – Fiberglass pools save you money in the long run. Since they don’t need to be resurfaced, the surface is fade and stain resistant and they maintain their look for many years.

Fiberglass Swimming Pool Coatings – Which One?

Wednesday, March 9th, 2011

Now that you have chosen a fiberglass pool for your oasis, which type of coating would work best?  There are several types of coatings and each one has its plus and minuses. 

Traditional Gel Coats – This type is hand applied. It is available in a variety of colors and custom blends.  Look similar to a plaster finish when the pool is full of water. Colored gel coats do not fade like the plaster kind and they stay smooth longer. 

Flekstone – This type is very similar to pebble finishes. It is hand applied, lamination using colored chips over a layer of fiberglass. Looks similar to rock or pebble pool finishes without the rough feeling.  Available in any color and they are colors that last a long time. 

So you see that there are several types of surface materials to choose from for your fiberglass swimming pool, so you should be able to find a material that fits your design scheme.

Do Not Drain Your Fiberglass Swimming Pool

Thursday, February 24th, 2011

 

Fiberglass pools are a cinch.  You can’t go wrong. They are easy to maintain, use very little chemicals and have the lowest lifetime cost than any other type of pool.  However, a fiberglass pool owner can screw that up by draining the pool. 

Pool owners think they should drain the pool if the water is stinky, green and has been stagnate for some time for example a foreclosure that has been abandoned. Only time to drain a pool is with a fiberglass pool technician’s assistance. 

The potential damage that can occur when draining a pool is bulging side walls and floors, splits in the floor and possible floating. The soil around the pool may be wet. If it is, it needs to be dry and the pool needs to be properly braced in case of shifting or floating.  Why take a risk with all of this and just leave the water in the pool.

Which is Better – Fiberglass or a Liner Swimming Pool

Friday, February 18th, 2011

When purchasing a swimming pool, you probably asked yourself, which is better a fiberglass or liner pool.  There are so many pro’s and con’s to both so it can be a little confusing. 

One major consideration is long term cost of ownership. A fiberglass pool with gel coat as its interior finish is virtually maintenance free.  In comparison, a liner pool, the vinyl will need to be replaced at some point.  

Liner pools are versatile and can be made into any shape you desire unlike a fiberglass pool that comes in standard shapes and sizes.  Also fiberglass pools have different preset features for different needs, so you have to find one that fits your needs and even your yard perfectly.

Top 4 Frequently Asked Questions About Fiberglass Pools

Thursday, February 10th, 2011

Will my fiberglass pool float after it’s installed? 

-      Well, yes they do float if you put them in a lake but the answer is NO.  In fact it is the biggest myth in the pool industry.  A properly installed fiberglass pool will not pop up after the concrete deck is poured so long as it remains full of water. 

How Large or Small Do Fiberglass Pools Come?

-    Fiberglass pools can be as large as 16’x40’.  Some models might come longer but no wider than 16’ because of highway shipping restrictions.  The smallest fiberglass pools are typically around 8’ x 16’.  The average pool is 14’wide and 30’ long.

How Long Does it Take to Install?

-         It depends on the time of year and how wet the ground is but it can take anywhere from 2 to 4 weeks to install and complete.

How much do Fiberglass pools Cost? 

-         On the average, a medium size pool with filter system and some patio will cost around 30,000.  Many pool owners add extra patio work and other option that could increase the price.

Fiberglass Pools – Will I need Weekly Service?

Tuesday, January 25th, 2011

Most of our fiberglass pool owners don’t have their pools serviced on a regular basis and that’s because they don’t have to. There are three main reasons why fiberglass pools don’t need weekly service.

1. The pH stays balanced – Fiberglass pool shells are chemically inert which means they do not react with the pH of the pool water. Unlike concrete pools, which are alkaline based and need acid added on a regular basis.

2. No or little brushing – The surface of a fiberglass pool is smooth and non porous. Algae have a hard time to attach grown on smooth surfaces.

3. Less Chemicals – The surface is smooth and non-porous which means fewer chemicals to keep it clean and sanitary.

So, as you can see, the biggest factor is how the surface of a fiberglass pool reacts with the water. This makes it easy for pool owners to maintain their own pool without spending earned money on regular pool service.